9 resultados para Forrageira tropcial

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The need for new sources of energy and the concern about the environment have pushed the search for renewable energy sources such as ethanol. The use of lignocellulosic biomass as substrate appears as an important alternative because of the abundance of this raw material and for it does not compete with food production. However, the process still meets difficulties of implementation, including the cost for production of enzymes that degrade cellulose to fermentable sugars. The aim of this study was to evaluate the behavior of the species of cactus pear Opuntia ficus indica and Nopalea cochenillifera, commonly found in northeastern Brazil, as raw materials for the production of: 1) cellulosic ethanol by simultaneous saccharification and fermentation (SSF) process, using two different strains of Saccharomyces cerevisiae (PE-2 and LNF CA-11), and 2) cellulolytic enzymes by semi-solid state fermentation (SSSF) using the filamentous fungus Penicillium chrysogenum. Before alcoholic fermentation process, the material was conditioned and pretreated by three different strategies: alkaline hydrogen peroxide, alkaline using NaOH and acid using H2SO4 followed by alkaline delignification with NaOH. Analysis of composition, crystallinity and enzymatic digestibility were carried out with the material before and after pretreatment. In addition, scanning electron microscopy images were used to compare qualitatively the material and observe the effects of pretreatments. An experimental design 2² with triplicate at the central point was used to evaluate the influence of temperature (30, 40 and 45 °C) and the initial charge of substrate (3, 4 and 5% cellulose) in the SSF process using the material obtained through the best condition and testing both strains of S. cerevisiae, one of them flocculent (LNF CA-11). For cellulase production, the filamentous fungus P. chrysogenum was tested with N. cochenillifera in the raw condition (without pretreatment) and pretrated hydrothermically, varying the pH of the fermentative medium (3, 5 and 7). The characterization of cactus pear resulted in 31.55% cellulose, 17.12% hemicellulose and 10.25% lignin for N. cochenillifera and 34.86% cellulose, 19.97% hemicellulose and 15.72% lignin for O. ficus indica. It has also been determined, to N. cochenillifera and O. ficus indica, the content of pectin (5.44% and 5.55% of calcium pectate, respectively), extractives (26.90% and 9.69%, respectively) and ashes (5.40% and 5.95%). Pretreatment using alkaline hydrogen peroxide resulted in the best cellulose recovery results (86.16% for N. cochenillifera and 93.59% for O. ficus indica) and delignification (48.79% and 23.84% for N. cochenillifera and O. ficus indica, respectively). This pretreatment was also the only one which did not increase the crystallinity index of the samples, in the case of O. ficus indica. However, when analyzing the enzymatic digestibility of cellulose, alkali pretreatment was the one which showed the best yields and therefore it was chosen for the tests in SSF. The experiments showed higher yield of conversion of cellulose to ethanol by PE-2 strain using the pretreated N. cochenillifera (93.81%) at 40 °C using 4% initial charge of cellulose. N. cochenillifera gave better yields than O. ficus indica and PE-2 strain showed better performance than CA-11. N. cochenillifera proved to be a substrate that can be used in the SSSF for enzymes production, reaching values of 1.00 U/g of CMCase and 0.85 FPU/g. The pretreatment was not effective to increase the enzymatic activity values

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The cactus pear has become over the years an important forage alternative for brazilian semiarid region, especially during long periods of drought. Despite its importance for agriculture, its cultivation has dispensed basic crop practices and fundamentals technical-scientific basis about its climatic requirements. Thus, the main objective of this study was to elaborate the agroclimatic zoning of cactus pear (Opuntia sp.) for the state of Paraíba. The agroclimatic zoning of cactus pear was based on climatic indicators outlined in the literature and climatological data of precipitation and temperature (mean, maximum, and minimum) from 97 locations in the state of Paraíba. According to the results, the region of ‘Borborema’ is the most favorable for the cultivation of cactus pear. The regions of ‘Agreste’, ‘Sertão’, and coastal part of Litoral may be used but with restrictions. However, the cultivation of cactus pear is recommended throughout the state of Paraíba, except the coastal part of the Litoral and the region around Areia. In both cases, the inability is due to excessive precipitation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Presents a composite formed by orthophthalic resin and fiber loading of carnauba straw. The fibers were first dried in direct sun exposure and subsequently ground into fodder for the reduction in size. Various formulations of the composite were preliminarily tested by choosing the one presenting the best processability in applying the mold. The composite produced is used for the manufacture of a parabolic surface subsequently coated with mirror segments, flexible plastic, for reflecting the solar rays incident on it. The reflective parable represents the main element of the solar cooker that works with the concentration of sunlight and has dimensions of 1.14 m in diameter and area of 1.0 m². Manufacturing processes and assembly of solar cooker concentration produced are presented. The results of tests for cooking and baking various foods, including rice, pasta, beans, cake, cassava, shrimp, beef, breaded demonstrating the competitiveness of solar cooker studied with other stoves already manufactured and tested in Brazil are presented and in the world. It was also demonstrated the feasibility of the proposed composite for Prototypes manufacture of solar and other structures that do not require great efforts resistance

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The control of gastrointestinal nematodes of small ruminants is usually done with anthelmintics. However, due to the emergence of ever-increasing parasite resistance to these drugs, looking up an alternative control parasites. One of this is sought in pasture management, as these are the sources of animals` infection by L3 infective larvae of helminths. The aim of this study was to evaluate the performance of sheep to natural infections by gastrointestinal nematodes grazing Panicum maximum cv. Massai and cv. Aruana, and Brachiaria brizantha cv. Piatã and cv. Marandu. The work was conducted from May to August-2011 with 48 male sheeps SRD versus Santa Inês breed. The animals were naturally infected with gastrointestinal nematodes, and maintained in four different cultivars of tropical forage grasses, naturally contaminated with eggs and larvae of gastrointestinal nematodes. Each week the animals were phenotypically characterized by parasitological examinations (eggs per gram of feces - EPG, and feces culture), hematological (packed cell volume PCV, and blood eosinophil count) method to evaluate the Famacha© colorof ocular mucosa, and the measures of body condition score and weight. In pastures was made the recovery of infective larvae in order to determine the quantity of L3 present in the pasture. The experimental design was a randomized completed block with two replications and before the entry of animals in the paddocks, they have been wormed. The experiment was ended when the animals reached 32.0 kg liveweight, and then were slaughtered and autopsies performed for the recovery and identify parasites of the abomasum, small intestine and large intestine. Results were subjected to analysis of variance, t test and Tukey`s test. The animals kept on pastures of Marandu grass had lower EPG counts, higher percentage of packed cell volume and higher average weight; those who remained in the Piatã pasture had lower eosinophil counts per microliter of blood. About the Famacha©, the highest prevalence was Famacha 2, and the body condition score ranged between 2 and 3. The results of feces cultures and recovery of larvae on pastures showed the presence of larvae of Trichostrongylus sp., and at the necropsy too. This way, it was concluded that the grass cultivars influences the sheep parasite load; the Famacha, together with EPG and packed cell volume are important indicators for use in controlling gastrointestinal nematode infections. The Trichostrongylus sp. was the most prevalent parasite in sheep during the rainy season

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of the present study was to identify the main plant use categories of native varieties from the Caatinga biome, in the rural community of Caicó, Rio Grande do Norte state (Northeastern Brazil). Semi-structured and structured interviews were used to gather information from local specialists about the use of the plants. The uses of 69 species are described by 23 observers (woodsmen, herb doctors, healers, farmers and housewives) aged 35 years or more. These species were allocated to seven categories: medicinal, wood plants, nutritional, mystic, fuel, forage plants and domestic use. The most represented families were Fabaceae (14 spp.), Euphorbiaceae (6 spp.), Cucurbitaceae (3 spp.) and Cactaceae (3 spp.). The calculation of use- value showed that the cumaru (Amburana cearensis (Allemão) A. C. Sm) and the jurema-preta (Mimosa tenuiflora (Willd.) Poir) were the most commonly mentioned, in addition to having the largest number of uses. The data obtained confirm the potential of the plants from the Seridó region and reinforce the importance of biodiversity for rural communities, underscoring the need for local plant management

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cactus pear is an important forage for livestock in semi-arid region of Brazil, due to its adaptation to climate conditions in this region, high productivity and nutritional value. The yield of this cactus has positively responded to techniques such as planting density, fertilization and cutting managements, however, in Rio Grande do Norte State, only certain areas have favorable climate conditions to the development of this crop. Drip irrigation, with a small amount of water, has proven to be an alternative to the viability of cactus pear cultivation in these areas. The research aimed to evaluate the effects of different levels of saline water and manure organic fertilization on the morphological characteristics and production of fresh and dry matter of the prickly-pear cactus cv. Miúda (Nopalea cochenillifera Salm Dick) in a dense planting system. The experiment was conducted at the Experimental Station of Terras Secas (EMPARN), Pedro Avelino, latitude 5°31'21" South and longitude 36°23'14" West. The soil was classified as Typical Cambisol Haplicum Carbonate and the water used in irrigation, C4S1T3 (5,25 dS.m-1), with planting spacing of 2.0 x 0.25 m (20,000 plants ha-1). A completely randomized design in a split plot was used, where water levels (0, 7.5, 15.0 and 30.0 mm month-1) with 10 days intervals, were the main plots and organic fertilization (0 , 25 and 50 Mg ha-1 yr-1) the subplots, with four replicates. The measured morphological characteristics were number of cladodes, height and volume of the plant; length, width, perimeter, thickness, area and cladodes area index, fresh and dry matter production, dry matter content, water use efficiency (WUE) and damage promoted by cochineal pest (Diaspis echinocacti) and soft rot (Erwinia carotovora). There was no influence (P>0.05) of organic fertilization on most variables, particularly in relation to the production of fresh and dry matter. The water levels had a significant influence (P<0.05) on most variables, promoting higher height and volume of the plants, larger and thicker cladodes, and increase on fresh and dry matter production (13.55 Mg DM ha-1 yr-1). The absence of irrigation caused a significant expansion in plant damage caused by the cochineal pest and when irrigated with different water levels there was an increase in damage and stand loss, caused by soft rot, been more intense at the higher water level.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this study was to evaluate the crossbred sheep Santa Ines response to natural infections by gastrointestinal nematodes in Panicum maximum cv. pastures Massai at different times of grazing. For this it was used 36 crossbred sheep Santa Inês, divided into four groups and randomly distributed in massai-grass pickets naturally infected by gastrointestinal nematodes. In the period from October 2013 to May 2014, the animals were weekly monitored for hematology tests (packed cell volume) and parasitological (egg counts per gram of feces and fecal culture) in order to monitor the level of infection of sheep and they were assessed for weight, body condition score and staining ocular mucosa by FAMACHA© method. Furthermore infective larvae was recovery from pasture in times of pre-and post-grazing pasture. At 35 kg body weight, the animals were slaughtered and necropsied to collect the contents of the abomasum and small and large intestines to recover the adult parasites, carrying out the count and identification. The animals on pasture with a height of 40 cm pre-grazing obtained low nematode eggs in feces (1608 eggs / g) and 33 cm those in pre-grazing the highest average (2,539 eggs / g). The animals in different groups showed mean values of packed cell volume less than 23% (P> 0.05). Regarding to FAMACHA, the animals belonging to the groups 40 and 50 cm pre-grazing remained over 50% of individuals between FAMACHA 1 and 2 , and those to 33 and 45 cm pre-grazing showed mostly between FAMACHA 3, 4 and 5 (69.06% and 58.93%, respectively). In the culture of larvae in feces and recovery of pasture larvae before and after grazing the following genera were found, in order of prevalence: Haemonchus, Trichostrongylus, Oesophagostomum and Strongyloides. The pasture with 33 cm of pre-grazing provided the highest number of larvae recovered both in the pre and post-grazing (1,081 and 715 L3 / 100 g of green matter, respectively). Among the different groups, the sheep had an average weight of between 23 and 26 kg and variation between the body 1 and 3 scores with scores greater frequency of 1.5 to 2.It can be observed that the animals kept at different times of grazing got different answers on the parasite load. Animals kept in 40 cm pre-grazing expressed a satisfactory answer than the other groups (33, 45 and 50 cm), best supporting the action of endoparasites. Moreover, this same height, was recovered fewer infective larvae on pasture in pre and post-grazing.